Menu
RFQ
Pushbuttons on the front panel allow the user to activate a switch point by pressing a button. The LED indicator turns green when the switch is on. The buttons can be disabled when remote access is used instead. Users can choose Matrix or Multiplex mode. Matrix configurations can be set anywhere from 16×2 to 4×8 for 32 channel systems.
Use the keypad to send commands directly to the switch. For example “L0 2 15” followed by enter will close Matrix # 0, Module # 2, Relay # 15. See the section on Command Syntax for more information. Commands include latch, unlatch, multiplex and clear.
Select a switch point using the pushwheel, select latch or unlatch, mtx or mux and hit strobe to close or open a switch point.