These Chassis controls up to 16 8×1 modules, 32 4×1 modules or mixtures of 8×1’s, 4×1’s, 2×1’s and 2×2 modules in any combination or configuration for up to 128 relay drives. LEDs on the front panel show switch and power status. Add Switch Modules to complete the system or simply buy the chassis wired out to D connectors to control your own relays. A manual control is optional. Chassis is available with sink or source relay drivers from + 5 to + 28 volts, ot TTL drivers for programmable attenuators. Firmware commands for Fade and Handover for WiFi, Cell Phone and WiMax labs. Fully custom systems built with little to no NRE.

Dimensions:
19″ Rack Mount (483 mm)
15″ deep (381 mm)
7″ to 10.5″ (4 to 6 RU) high (180 to 270 mm) Depending on what relays you want to install.
Weight: 15 to 35 lbs (7 to 15 Kg) max
AC Power : 50 to 200 Watts max. 110/220 selectable.

Externally Panel Mounted relays can be swapped without taking chassis out of rack.
DC to 40 GHz 50 ohm systems
1×2, 2×2, 1×3 to 1×12 microwave relays.
SMA, 2.92 mm, N, TNC or other connectors
LAN, GPIB, USB, RS232 or Manual Control
100″s of relay choices from almost any vendor.
Custom systems and configurations
Driver chassis wired to D connectors with +5 to +28 volt drives. Sink or source.